If you’re a coffee lover, chances are you’ve invested in a Keurig coffee machine for the convenience and speed it offers. However, like all coffee machines, Keurig machines need to be cleaned regularly to ensure that they’re functioning optimally. A dirty machine not only affects the taste and quality of your coffee, but it can also lead to long-term damage to your machine.
Cleaning your Keurig coffee machine doesn’t have to be a chore or an expensive task. With a few simple ingredients, you can create a DIY cleaning solution that is just as effective as commercial cleaning products. In this article, we’ll walk you through the steps of cleaning your Keurig coffee machine using a DIY cleaning recipe.
Before you start cleaning your Keurig coffee machine, it’s important to note that the cleaning process varies depending on the model of your machine. Some Keurig models have a descaling feature built-in, while others require manual descaling. Refer to your machine’s manual for specific instructions on how to clean your machine.
Here’s what you’ll need to clean your Keurig coffee machine:
- White vinegar
- Water
- Dish soap
- A microfiber cloth or a sponge
- A paperclip or a toothbrush
Step 1: Clean the exterior of your machine
Start by unplugging your Keurig coffee machine and wiping down the exterior with a microfiber cloth or a sponge. Use a small amount of dish soap and warm water to remove any dirt or grime that may have accumulated on the machine’s surface.
Step 2: Clean the water reservoir
Empty the water reservoir of any remaining water and wash it with warm soapy water. Rinse the reservoir thoroughly with clean water and wipe it dry with a clean cloth.
Step 3: Descale the machine
Descaling is an important part of cleaning your Keurig coffee machine. Over time, mineral deposits can build up inside your machine, affecting the taste and quality of your coffee. To descale your machine, you’ll need to mix equal parts of water and white vinegar.
Pour the mixture into the water reservoir and turn on your Keurig coffee machine. Place a large cup or mug on the drip tray to collect the solution. Run the machine on the largest cup setting and wait for the solution to be dispensed. Repeat this process until the water reservoir is empty.
Once you’ve descaled your machine, rinse the water reservoir thoroughly with clean water and wipe it dry with a clean cloth. Refill the reservoir with clean water and run the machine on the largest cup setting to flush out any remaining vinegar solution.
Step 4: Clean the K-cup holder and funnel
Remove the K-cup holder and funnel from your Keurig coffee machine and wash them with warm soapy water. Rinse them thoroughly with clean water and wipe them dry with a clean cloth.
If you notice any coffee grounds or debris stuck in the K-cup holder, use a paperclip or a toothbrush to gently remove them. Be careful not to scratch the surfaces or damage the machine.
Step 5: Clean the drip tray and drip tray cover
Remove the drip tray and drip tray cover from your Keurig coffee machine and wash them with warm soapy water. Rinse them thoroughly with clean water and wipe them dry with a clean cloth.
Step 6: Reassemble and test your machine
Once you’ve cleaned all the components of your Keurig coffee machine, reassemble them and plug the machine back in. Run the machine on the largest cup setting with a K-cup to ensure that it’s functioning properly.
More interesting articles you may be interested in reading:
How To Remove A Tree Stump Painlessly
10 Vital Home Maintenance Tasks You’ll Regret If You Forget
See How Much Propane Is Left In A Tank With No Gauge
Thanks for reading and be sure to share this info with your friends using the social share buttons below.
Talking about social stuff, consider liking our Facebook page to keep up to date with our articles. Check out our other articles for more mental scoops!
